Part # FCF-VC-ASpd-KBDome - Kustom Bitz polished stainless steel bolt kit to suit Ford Crossflow valve covers.  This KustomBitz SS bolt kit is made to bolt the AussieSpeed brand rocker covers to your Ford Xflow head with shinny polished dome nuts. You get 8 x polished 316 Stainless Steel Dome nuts, polished washers, polished spring washers and 1 x 3ft length of grade 5 black all thread to cut to make the studs. One length is 6 inches more than you need, and if you cut one too short you have enough to make one more. This kit suits Aussie Speed Ford cross flow tappet covers with part numbers AS0046R, AS0046B, AS0046P, AS0047R, AS0047P. The AussieSpeed valve covers are styled for a long stud that goes the full depth of the valve cover to give a good even pull on the gaskets, this Aussie Speed styling does away with a flange like on typical other aftermarket rocker covers that tends to to flex or crack. This reduces the potential for oil leaks and KustomBitz supplies you with grade 5 threaded rod and not the cheap soft pissy all thread like you get in the hardware store.  If you use the soft stuff you will probably snap it off in the head, so we supply the good stuff so you won't end up stuffing around.